Service Forum

tkop · Interesat Joined: 05 Jan 2006 Posts: 20

hi!

How to find (or remove) the password of the bios D410??

Is there a program to remove password for X300, I can booter with key usb?

bob · Posted: Sun Jun 03, 2007 2:26 pm Post subject:

As I recall, D400 uses a 24C04 eeprom, I think D410 uses the same type.
If you want to retrieve the password (forensic) you can use driven i2c programmer and Ponyprog and read it in system. IBMpass will show the password at 0x110 offset.

On the other hand, if you don't care about the password you may use a little piece of software to generate the spare password based on the service tag. It doesn't work for -595B tags.

tkop · Interesat Joined: 05 Jan 2006 Posts: 20

for X300 i can boot on winxp, but i dont know bios password, who i can find prog for show bios password?

Dell D410 i need i2c programmer and Ponyprog? who i can find schema and others prog???

please, thanx!!

tkop · Interesat Joined: 05 Jan 2006 Posts: 20

i can read password from eeprom under windows xp? and use IBMpass??

i'v X300???

tkop · Interesat Joined: 05 Jan 2006 Posts: 20

hi,
i find this

victor · S.F. Boss Joined: 07 Mar 2004 Posts: 2581 Location: Staff

My advice is to not try that stupid "method", the eeprom must be read, not short circuited in any way!

Bob explained to you what to do, search for a 24CXX eeprom and read it out.
_________________
Victor Voinea
ALLservice HQ, Romania.

tkop · Interesat Joined: 05 Jan 2006 Posts: 20

who's the schema eeprom???

victor · S.F. Boss Joined: 07 Mar 2004 Posts: 2581 Location: Staff

You've written the same questions all over the forum. Please, try to stick with this opened thread!.

We already answered you, D4XX (not D420) have 24CXX eeproms, usually 24C04 and this can be read with any software you want. Bob suggested PonyProg because it functions with driven programmer and SIPROG. So search for one of these oin your board..or try the service tag method.
_________________
Victor Voinea
ALLservice HQ, Romania.

tkop · Interesat Joined: 05 Jan 2006 Posts: 20

thank u Victor, i try first option, but I do not know this method (Service Tag) i have -595B tags.

victor · S.F. Boss Joined: 07 Mar 2004 Posts: 2581 Location: Staff

Ah, in this case you have to find the 24C eeprom. Is not hard to read this, find it first and I will tell you what to do, step by step if necessary.
_________________
Victor Voinea
ALLservice HQ, Romania.

tkop · Interesat Joined: 05 Jan 2006 Posts: 20

okay, first i try to build interface (24Cxx reader/writer)!!!

thank's

tkop · Interesat Joined: 05 Jan 2006 Posts: 20

hi,

now i have 24Cxx R/W device, where i can find the eeprom in motherboard (D410)???

how to locate the eeprom???

regards.

bob · Posted: Fri Jun 22, 2007 11:08 am Post subject:

Sorry, we do not have a picture of this yet, maybe you will post one after you'll find it.

Sometimes the 24C04 is covered by a sticker, but the eeprom must be there somewhere

tkop · Interesat Joined: 05 Jan 2006 Posts: 20

is what I can identify with dimensions? 1cmX1cm ??? or small??

for picture i have bad quality, i will post picture after!!

tkop · Interesat Joined: 05 Jan 2006 Posts: 20

i post pictures but its bad quality (cell phone)

http://membres.lycos.fr/tkop/

from Photo-0017.jpg to Photo-0031.jpg

please help me!

regards.