ALLservice Service Forum
support board, PC repair, unlocking solutions
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

ThinkPad 365 eeprom ndump

 
Post new topic   Reply to topic    Service Forum Forum Index -> IBM/Lenovo ThinkPad Password Help Center (EN)
View previous topic :: View next topic  
Author Message
serg
Nou Venit


Joined: 29 May 2006
Posts: 3
Location: Russia
PostPosted: Mon May 29, 2006 11:15 am    Post subject: ThinkPad 365 eeprom ndump Reply with quote
Maybe someboby have 93c46 dump for thinkpad
365. I have a big trouble with this machine. during startup it display
error 185 (corrupted boot sequence) then it goes to boot devices select menu i try to reset sequence, use many variants, remove cmos battary,
but have no positive result. I thing that is a bug of a BIOS and now i
need a "cleen" dump for TP 365x.
Back to top
View user's profile Send private message
bob
S.F. Moderator


Joined: 07 Mar 2004
Posts: 802
Location: Staff
PostPosted: Mon May 29, 2006 12:10 pm    Post subject: Reply with quote
There's not a bug, just the selected media is not bootable. You have to enter BIOS and Load Setup Defaults that's all.
Tp 365x? I've never seen one
Back to top
View user's profile Send private message
serg
Nou Venit


Joined: 29 May 2006
Posts: 3
Location: Russia
PostPosted: Mon May 29, 2006 12:31 pm    Post subject: Reply with quote
It's a funny but i can't enter bios cause this error goes me to boot devices
select menu, and not allow to enter EasySetup
Back to top
View user's profile Send private message
serg
Nou Venit


Joined: 29 May 2006
Posts: 3
Location: Russia
PostPosted: Mon May 29, 2006 12:34 pm    Post subject: Reply with quote
ThinkPad 365X IBM (C)1996
Pentium 100
8 megs ram
1,2Gb HDD
800x600x16M TFT 10'3
Back to top
View user's profile Send private message
victor
S.F. Boss


Joined: 07 Mar 2004
Posts: 2581
Location: Staff
PostPosted: Tue May 30, 2006 1:05 am    Post subject: Reply with quote
Quote:
Tp 365x? I've never seen one...
Neither do I.

There is a password to enter EasySetup
I have to dig deep to find your model specs
If is 2625 model try this:
1. Power off the computer.
2. Open the keyboard and lift the right-most section of the insulator sheet.
3. Push out the small door on the right side of the base cover.
4. Apply a short across the Power-On Password Jumper Pads.
5. With the jumper tool in place, power on the computer to clear the password.
6. Remove the jumper and power off the computer.
7. Power on the computer and verify that the password has been cleared.

I hope it worths the effort spent
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Service Forum Forum Index -> IBM/Lenovo ThinkPad Password Help Center (EN) All times are GMT + 2 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Powered by phpBB © 2001, 2005 phpBB Group